Newton Control Panel Pro

Multi-Function Pump Control and Monitoring Panel

The Newton Control Panel – Pro is a class-leading pump control panel with many unique features, which has been designed by John Newton to provide the ultimate in pump operation and diagnostic. The panel features interfaces for use with John Newton power back-up and telemetry systems as well as connections to whole house alarm and monitoring systems. The Control panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail. This effectively means that Newton Control Panel-Pro is two control panels in one case, offering unrivalled redundancy.

Self diagnostic programs test the pumps on a weekly basis to ensure correct pump performance, with the appointed service engineer automatically informed of any detected problem with either of the pumps if the Newton Dialer telemetry system is installed.

The Newton Control Panel Pro will operate a maximum of two 750W 230V AC pumps. The panel is supplied with a vertical water level float switch and high water alarm float switch. The panel is designed to be used with an optional Newton Power Converter, sized to suit the pumps installed and a minimum of one 12VDC standby battery of at least 110A/H.

Purchase Codes

• The Control Panel-Pro has a purchase code of CP2.
• Purchase Code CP7 should be used to purchase the control panel with the pre-programmed Newton Dialer already fitted inside the case of the control panel. Please see across the page for further information.