3mm Meshed Damp Proofing Membrane
Newtonite provides a firm key and impermeable barrier on any damp or deteriorating surface where direct bonding is not possible. Even poor and random substrates can easily receive Newtonite.
Newtonite presents a physical barrier between the old surface and the new internal finish. Unlike many systems it can be punctured when new wall fixings are required. Holes drilled through the material must however be well sealed with Newton Mastic to stop any ‘bridge’ between the surfaces.
Positive internal air pressure ‘pushes’ vapour, suspended within the air gap created by the studded membrane, through the external wall and out of the property. Newtonite can be used on virtually any type of surface of a thickness and strength sufficient to support the material and final finish.
Newtonite provides a firm key, an effective barrier where direct bonding is not possible because the surface has been affected by damp, salts, oils (or other injurious substances) or simply where the surface has deteriorated and crumbled.
Newtonite will also overcome the affects of ‘cold face’ and thereby improve insulation.
Newtonite provides the once and for all solution to all the above problems.
Newtonite 803 is available in roll sizes 1m x 10m – 10m2 (M16), 1m x 20m – 20m2 (M21) and 2m x 20m – 40m2 (M22).
Further Information
For further information or to order please ring 020 7237 1217 or e-mail info@newton-membranes.co.uk
Click here for product specifications on the NBS Live Feed
System 800 – Damp Proofing - View Full Product Range
| Product resources | Click To View |
| Data Sheet - Newton 803 Newtonite |  |
| Installation Instructions - Newton 803 Newtonite | |
| Data Sheet - Newton System 800 Ancillaries | |
