Multi-Use Products

The Multi-Use section of the website is home to products that are used within more than one of our systems. Newton Waterseal Tape, for example, can be used with System 300, System 400, System 500, System 600 and System 800.

Newton Mesh Tape (A25)

View Full Product Details and Datasheet

Newton Mesh Tape is a self-adhesive sealing tape made of a butyl rubber compound with a polypropylene fleece finish. The tape has been developed for use with Newton Meshed Membranes where a surface ‘key’ is required for plastering or rendering over. Read More…

Newton Overtape (A7, A7W, A8, A9)

View Full Product Details and Datasheet
Newton Overtape is used to create single sided taped joints as an overtape to seal adjacent butted and overlapped membranes, or to seal above joins to the membrane created whilst shaping the membrane to fit convoluted substrate.

Newton Overtape can also be used for the sealing of protrusions through the membrane. Read More…

Newton WaterSeal Rope (A6, A6W)

View Full Product Details and Datasheet
Newton WaterSeal Rope is used to form a seal at the overlap of adjacent sheets of Newton membranes when neither a flange joint of stud into stud joint has been made. A bead of WaterSeal Rope is used for the sealing of penetrations through the Newton membranes and to create a sealing ring to the base of the Newton Nuseal Plug. Read More…

Newton WaterSeal Tape (A5, A5W)

View Full Product Details and Datasheet
Newton WaterSeal Tape is used to form a seal at the overlap of adjacent sheets of Newton membranes. The tape is laced between the flange of one sheet and the top flat surface of the next, or if the studs interlock, it can be used to seal between the flat contact area of this type of joint. Read More…

Newton MultiPlug (A1)

View Full Product Details and Datasheet
Newton MultiPlug has been engineered to give a better fix in questionable substrate. It has the added benefit of having a rubber sealing grommet supplied with the plug. In very poor substrate, a pin (supplied in bags of 100 at extra cost) is inserted into the plug that expands its outer circumference by nearly 2mm to tighten the plug into the substrate. Read More…

Newton NuSeal Plugs (A2, A3)

View Full Product Details and Datasheet
Newton NuSeal Plugs are used to secure Newton System 500 membranes to building substrate and to fix battens or tracking systems. Prior to using NuSeal plugs, wrap a bead of Newton WaterSeal Rope around the head of the plug to form a compression seal. Nuseal Plugs are recommended when applying Newton 508 or Newton 508 Mesh to vaulted arches. Read More…