Newton System 500-Cavity Drain Waterproofing

QUICK LINKS

Newton System 500 - Cavity Drain Waterproofing, View All ProductsNewton System 500

The professional’s “basement waterproofing system of choice”, Newton System 500 is an internally applied basement waterproofing system based upon our range of cavity drain membranes, drainage conduits and sophisticated pumping and control systems.

Newton System 500 is a maintainable system, so complies with BS8102 Code of Practice for Protection of Structures Against Water from the Ground.

Newton recommends that our structural waterproofing systems are installed by one of our Nationwide Network of Newton Specialist Basement  Contractors (NSBC) who have been trained by Newton and can offer full PI on design and insured backed guarantee on the installation.

                        system-500-components……………………..

Newton System 500 Component 1 – Waterproof Membranes

Newton 503 Cavity Drain Membrane (M5)

3mm Cavity Drain Membrane for Basement Walls, Floors & Vaulted Soffits

Newton 503 is a high quality BBA approved cavity drain waterproofing membrane suitable for use internally to retaining walls, vaulted soffits and floors.

Newton 503 3mm Cavity Drain Membrane for Basement Walls, Floors and Vaulted Soffits
- View Full Product Details and Datasheet

Newton 503 Mesh Cavity Drain Membrane (M11 & M12)

3mm Meshed Cavity Drain Membrane for Basement Walls & Vaulted Soffits

With its 3mm stud, Newton 503 Mesh is just 3.5mm in overall thickness, and is the preferred meshed membrane where space is of a premium.

Newton 503 Mesh 3mm Cavity Drain Membrane for Basement Walls & Vaulted Soffits
- View Full Product Details and Datasheet

Newton 508 Cavity Drain Membrane (M1R & M2R)

8mm Cavity Drain Membrane for Basement Walls, Floors & Vaulted Soffits

Newton 508 is a high quality cavity drain waterproofing membrane suitable for use internally below the ground to retaining walls, vaulted soffits and floors. Newton 508 is the flagship membrane in our range and one of the most specified cavity drained membranes in the UK.

Newton 508 Cavity Drain Membrane is certified for protection against Radon.

Newton 508 8mm Cavity Drain Membrane for Basement Walls, Floors and Vaulted Soffits
- View Full Product Details and Datasheet

Newton 508 Mesh Cavity Drain Membrane (M3)

8mm Meshed Cavity Drain Membrane for Basement Walls & Vaulted Soffits

Newton 508 Mesh is a high quality meshed cavity drain waterproofing membrane, suitable for use internally below the ground to retaining walls and vaulted soffits. Newton 508 Mesh is typically used where space prevents the use of a dry-lining frame or block wall as the wall finish or where a direct rendered or plastered finish is preferred to vaulted ceilings.

Newton 508 Mesh 8mm Cavity Drain Membrane for Basement Walls & Vaulted Soffits
- View Full Product Details and Datasheet

Newton 520 Cavity Drain Membrane (M15)

20mm Cavity Drain Membrane for Basement Floors

Newton 520 is a cavity drain waterproofing membrane made from recycled High Density Polypropylene (HDPE).  With its 20mm deep stud profile, Newton 520 is used within Newton System 500 as a high drainage capacity floor membrane and is generally specified where it is anticipated that there may be a risk of severe water penetration.

Newton 520 20mm Cavity Drain Membrane for Basement Walls & Vaulted Soffits
- View Full Product Details and Datasheet

Newton 520 Eco Cavity Drain Membrane (M4 & M13)

Recycled 20mm Cavity Drain Membrane for Basement Floors

Newton 520 eco is a cavity drain waterproofing membrane made from recycled High Density Polypropylene (HDPE). With its 20mm deep stud profile, Newton 520 eco is used within Newton System 500 as a high drainage capacity floor membrane and is generally specified where it is anticipated that there may be a risk of severe water penetration.

Newton 520 20mm Cavity Drain Membrane for Basement Floors
- View Full Product Details and Datasheet

Newton System 500 Component 2 – Drainage

Newton Basedrain

Drainage System

Newton Basedrain is the drainage system used most commonly within the Newton System 500 waterproofing system. It comprises a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage (drainage that is below the level of the basement floor that cannot back-up or block)

Newton Basedrain Drainage System
- View Full Product Details and Datasheet

Newton Baseboard

NEWTON 61_smallDrainage Conduit

Newton Baseboard is a unique above slab drainage conduit that is designed to capture water that is entering properties via the wall/floor junction for removal to an appropriate drainage medium

Newton Baseboard Drainage Conduit- View Full Product Details and Datasheet

Newton Condensation Strip

Condensation-StripQuick and Efficient Alternative to Using a Strip of Wall Membrane to Create a Condensation Gap

At 250mm high and with a diamond stud pattern to prevent interlocking of studs, Newton Condensation Strip is a quick and efficient alternative to using a strip of wall membrane to create the condensation gap.  It is highly resistant to water, alkalies, saline solutions and organic acids, and is not effected by minerals. It is also resistant to bacteria, fungi and other small organisms

Newton Condensation Strip – View Full Product Details and Datasheet

Newton System 500 Component 3 – Pumping System

Titan-Pro White (TPW)

The Newton Titan-Pro White is designed specifically to be used with Newton System 500 – Cavity Drain Waterproofing. The adjustable neck allows for the sump to be installed at a fixed height relative to the slab so that the connection in from the Newton drainage system and the pump discharge line are made above the concrete.

View Full Range of Newton Pumping Systems

Newton System 500 Component 4 – Water Pump

Newton NP400 (P2 & P3)

High head and high to medium performance pump. The NP400 is available as an automatic pump (as shown), or as a manual pump for use with our pump control systems.

View Full Range Of Pumps

Testimonial

Having worked with the quality products from Newton System 500 range for the last 14 years we have every confidence when issuing our long term guarantee on installations. The durability and performance of the products in service have proved exemplary.” – Gary Briscoe, Protectahome, Newton Specialist Basement Contractor (NSBC)

I would like to thank John Newton & Company for the outstanding level of service given to A P Gooch Basement Waterproofing over the last 10 years. No other manufacturer has given the level of support that John Newton has offered. I believe John Newton & Company is the leading manufacturer in membranes within the industry and we have 100% confidence in them whether it be on site, designs, training and prompt deliveries of materials. Without doubt a big part of my company’s success is down to the commitment and personalised service. I look forward to many more years of success using John Newton products and designs.” Anthony Gooch, AP Gooch Limited Newton Specialist Basement Contractor (NSBC)

How Newton System 500 Works – Watch Video

Case Studies

View Newton System 500 Case Studies

Further Information and Registered Installers

For further information or to speak to one of our technical experts, please ring 01732 360 095. For a list of Newton Specialist Basement Contractors (NSBC) in your area, please e-mail info@newton-membranes.co.uk or fill out our online form: Request List of Registered Installers

PDF Converter    Send article as PDF   



 

image image image image image image image
Web Inclusion A Web Inclusion website.