Basement Waterproofing Hampshire – Retaining Brick Floor Finish

Basement Waterproofing Project, Hampshire

Newton System 500 used to convert a damp basement into a usable dry space

Newton Specialist Basement Contractor, MacLennan-LSE were engaged by Acorn Construction to carry out a site survey and to specify the necessary work to provide a guaranteed dry habitable area in the basement of the house while retaining the existing floor finishes of brick.

Newton System 500 is the ideal basement waterproofing solution. Newton Specialist Basement Contractors operate nationwide – for a list of Newton Specialist Basement Contractors in Hampshire, please contact John Newton & Company on 020 7237 1217   or e-mail info@newton-membranes.co.uk

Method For Basement Waterproofing

Basement Waterproofing Hampshire - Pump Installation

Installation for Newton Titan Pro

MacLennan-LSE tradesmen carefully removed the existing brick floor and carefully set it to one side. A concrete floor was installed with a Newton Basedrain set in at the wall floor junction. Newton System 500 cavity drain membrane was installed over the concrete floor and sealed to the basedrain. A Newton Titan Pro self contained sump with 2 in number 400 Watt pumps was then installed, and a high level alarm system. The MacLennan-LSE tradesmen then relayed the traditional brick floor onto the membrane. The inverted lid of the sump chamber was filled with the bricks laid in traditional mortar.

Result

The basement was converted from a very damp unusable space to a completely dry guaranteed habitable area which complies with BS8102 2009 and was guaranteed against water ingress.

Benefits of Basement Waterproofing with Newton System 500 and Newton Specialist Basement Contractor

Basement Waterproofing Hampshire - Brick Floor Installation

The existing brick floor finishes could be retained

  • The whole contract was designed and carried out by MacLennan-LSE under their insurance cover and PI. The whole system was guaranteed for 10 years by MacLennan-LSE.
  • The system was installed over friable bricks and mortar where any other system such as cement, epoxy based systems would not be suitable.
  • The system could be ventilated to allow the walls to “breathe” or it could be sealed to offer gas protection.

Further Information and Registered Installers

For further information about waterproofing a Hampshire basement, or for a list of Newton Specialist Basement Contractors in your area, contact John Newton & Company on 020 7237 1217  or info@newton-membranes.co.uk

This entry was posted in Case Studies List, STRUCTURAL WATERPROOFING • October 6th, 2011 • Back To Top

Leave a Reply



 

image image image image image image image
Web Inclusion A Web Inclusion website.